ISSN 2305-6894

Corrosion inhibition studies of new synthesized 1,4-dioctyl-6-methyl-1,4-dihydroquinoxaline-2,3-dione on mild steel in 1.0 M HCl solution using gravimetric and electrochemical techniques supported by theoretical DFT calculations

  • , , , , , , , , and
1 Laboratory of Applied Organic Chemistry, Faculty of Science and Technology, University Sidi Mohammed Ben Abdallah, Fez, Morocco
2 Laboratory of Valorization and Technology of Saharian Resources (VTRS), Faculty of Technology, Hamma Lakhdar University, 39000, Algeria
3 Dеpartmеnt of Chemistry, College of Scіеncеs, Unіvеrsіty of Sharjah, PO Box: 27272, UAЕ
4 Laboratoire de Chimie Organique Hétérocyclique, URAC 21, Pôle de Compétences Pharmacochimie, Université Mohammed V, Faculté des Sciences, Av. Ibn Battouta, BP 1014 Rabat, Morocco
5 Laboratory of Analytical Chemistry, Materials, and Environment (LC2AME), Faculty of Sciences, University of Mohammed Premier, B.P. 717, 60000 Oujda, Morocco

Abstract: The inhibition performance of 1,4-dioctyl-6-methyl-1,4-dihydroquinoxaline-2,3-dione (AY15) was studied as an inhibitor of mild steel in 1.0 M HCl solution at 308 K using experimental methods and theoretical calculations. 1,4-dioctyl-6-methyl-1,4-dihydroquinoxaline-2,3-dione (AY15) was synthesized and identified by elemental analysis, IR, 1H NMR and 13C NMR spectroscopy. The corrosion inhibition of (AY15) in 1.0 M HCl solution for mild steel was evaluated using weight loss and electrochemical techniques. The weight loss results show that inhibition efficiency increasing with increasing AY15 concentration and maximum value was obtained at 10–3 M concentration. Polarization analysis suggests that compound act as a mixed type of inhibitor. EIS data showed that in the presence of inhibitor, transfer resistance increased and Cdl decreased due adsorption of inhibitor at the metal surface. It was found also that the adsorption of the inhibitor on the mild steel surface obeys the Langmuir isotherm model. The weight loss, electrochemical and Density Functional Theory (DFT) calculations are in good agreement.

Keywords: mild steel, electrochemistry, weight loss, inhibitor, theoretical investigation

Int. J. Corros. Scale Inhib., , 2, 225-240 PDF (1 077 K)
doi: 10.17675/2305-6894-2019-8-2-5

Download PDF (Total downloads: 24)

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Back to this issue content: 2019, Vol. 8, Issue 2 (pp. 150-...)